Wilson Industrial produces a finishing saw up to a 3 ft diameter blade that tilts up to 45 degrees. This saw also includes an infinite turn turntable under it, being fully programmable to angle of cut, angle of turn, and for odd shapes this is one of our highest producing saws. It is used for...

Wilson Industrial’s newest innovation is our Plunge Cut Rotary Blade Saw. These saws are similar to our large rotary blade saws and tailored toward limestone and sandstone cutting. Because of the softer stone these saws are designed to take the entire cut at once, no need to chip a little away at a time with...

Wilson Industrial’s Turntable utilizes a ring gear in the center, between the tubing, with a gearbox unit, that is used for rotating the table. A pendant control can be used to rotate the table or you can purchase a control package that will allow you to integrate the Turntable movements through the PLC on the...

Wilson Industrial’s Heavy-Duty Conveyors are built to handle the abuse of moving stone slabs of varying widths and heights and come in either gravity roller, powered roller, or slider belt type. We also build chain transfer conveyors for moving stone from one conveyor line to another or to an alternate removal point. These conveyors are...

Wilson Industrial’s Rip Saw is mounted over a belt or roller conveyor and is used to cut stone slabs along the length of the slab.  It can be configured with one saw head or multiple saw heads to turn your stone slabs into strips that can then move down the conveyor for further processing. This...

Wilson Industrial’s Cut Off Saws are designed to provide the finish cuts on smaller pre-cut and pre-slabbed pieces of stone. The cut off saw can be mounted over existing conveyors or supplied with our Heavy-Duty Conveyors and is used to cut strips or slabs of stone to the required length. These saws can be configured...

Wilson Industrial’s Line Polisher/Gauger can be configured from 2 to 12 heads in a row.  These heads straddle a heavy-duty slider belt conveyor and can handle from ½” to 6” thick by 5-foot-wide slabs of stone.  The pressure of each head can be programmed and controlled by a regulated air system. This machine can polish...

Wilson Industrial’s Single Head Polisher can be built to run over a raised table or to operate from the floor.  Wilson produces 2 types of polishers: We have a simple hydraulic pressure version and the newer air pressure version.  The hydraulic version works well for granites and harder stones and our air pressure version was...

Wilson Industrial’s Medium Duty blade saws are manufactured with Mitsubishi UL certified control systems. They all have Rockford ball screw assemblies for the rise and fall and come with direct belt drive or transmission drive systems depending on the blade size.  All sizes can be ordered as a Stationary with an 8 x 8 cart...

Wilson Industrial’s Multi Strand Fixed Wire Saws are built to last in sizes ranging from 5′ up to 8′. All wire saws are manufactured with Mitsubishi UL certified control panels with the latest variable and repeating program.  The wire saw has become a favorite among our big block customers, so they can get an edge...

Wilson Industrial’s Wire Saws are built to last in sizes ranging from 5′ up to 8′. All wire saws are manufactured with Mitsubishi UL certified control panels with the latest variable and repeating width program.  The wire saw has become a favorite among our big block customers, so they can get an edge over the...

Wilson Industrial’s Heavy-Duty Saw is manufactured complete with a Mitsubishi UL certified control panel and is used to cut larger blocks into slabs or smaller sizes for multiple uses. They all have Rockford ball screw assemblies for the rise and fall and are built for production. All sizes can be ordered as a Stationary with...

The Wilson Industrial Orbit Saw has standard programming abilities like our standard machines such as automatic height detection, automatic length detection, and has a governor control for varying the speed of the cut through the stone. The orbit head allows you to program cuts on the y axis and also allows you to orbit the head around ninety degrees to program cuts on the x axis, eliminating the need for a turntable.